Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of Engine Spark Plugs

Model: Kia Sorento MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Spark plugs

See other generations:
Video tutorial

This guide shows how to remove and replace the engine spark plugs on your car. First, remove the plastic engine cover to access the spark plugs. Next, disconnect all connectors supplying power to the spark plugs, and then you can begin to remove and unscrew the spark plugs using the appropriate socket.

Once removed, check for wear and decide if replacement is necessary. If replacing, remember to use a torque wrench to tighten the new spark plugs to the correct torque.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Side Step Installation Instructions
Side Step Installation Instructions
Kia Sorento (2009-2014 / MK 2) Remove the clips along the edge of the wheel arch to take off the splash guard. Next, remove the side skirt (screws and clips) and also take out the …
How to Replace the Alternator on a Kia Sorento
How to Replace the Alternator on a Kia Sorento
Kia Sorento (2009-2014 / MK 2) This guide covers the removal of the alternator on a Kia Sorento. Pull the lever located at the bottom left of the dashboard and lift the bonnet, sec…
Replacing the Cabin Air Filter
Kia Sorento (2002-2009 / MK 1) Frequent replacement of the pollen filter prevents allergies as it purifies the air in the cabin. The filter is located behind the passenger side glo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos