Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sportage
    4. : How to disassemble the car radio in the KIA Sportage?

Kia Sportage - Video tutorial

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Car stereo
Operation: How to disassemble the car radio in the KIA Sportage?

In this video we can see how to disassemble the car radio in the KIA Sportage, a very simple and fast operation. First we disengage the plastic of the front part of the central tunnel as shown in the video, then we remove the bulkhead of the dashboard on the passenger side and unscrew the fixing screw of the dashboard. Once the latter has been removed, unscrew the 2 screws of the air vents. At this point, we can unscrew the 4 fixing screws of the car radio, extract it and disconnect the rear connectors. Finally, we assemble the replacement following the reverse procedure.


Posted on 1 August 2022 by ScegliAuto



Disassembly of the car radio on Kia Sportage 2
Kia Sportage (2004-2010 / MK 2, KM) Today we will see the steps that we will need to disassemble the original car radio on a second series Kia Sportage, following the instructions below
How to disassemble the car radio of a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Before we can start, we will have to go and sit in the driver's seat of our Kia Sportage. We then start by disengaging and removing the covers of the
How to disassemble the car radio of the Kia Sportage year 2012
Kia Sportage (2010-2016 / SL, MK 3) The frame around the car radio of the Kia Sportage is squared with respect to the dashboard trim moldings, therefore the first operation to be done w

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos