Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Cee D
    4. : How to reset the service light on the Kia Ceed.

Kia Cee D - Video tutorial

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Instrument cluster
Operation: How to reset the service light on the Kia Ceed.

In this new guide dedicated to your Kia Ceed (2012-2018), we will show you a very simple and quick method through which you can manually reset the service light. First of all, you obviously need to insert the key and turn on the dashboard of your Kia Ceed. Then, locate the buttons with the Up and Down arrows at the bottom right of the steering wheel and use them to navigate within the onboard menu. Once you have found the section related to vehicle maintenance, hold down the "Enter" button located below the arrows and release it immediately after completing the reset.


Posted on 8 May 2023 by ScegliAuto



How to reset the service light on a KIA Ceed?
Kia Cee D (2018-2024 / MK 3, CD) In this tutorial, we can see how to reset the service in the KIA Ceed, an extremely simple and fast operation, to be carried out only after completin
How to perform a service reset on a Kia Ceed.
Kia Cee D (2012-2018 / JD, MK 2) Thanks to today's very short video tutorial, we can see all the necessary steps to reset the maintenance light on a second-generation Kia Ceed, produ
How to service reset a Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) To reset the work light on your Kia Ceed, first close all doors, then turn the key to the ignition position, but do not start the engine. Use the nav

Other guides that may interest you

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos