Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Filter Replacement on the Kia Picanto

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Engine oil

To replace the engine oil and filter, follow the steps outlined below for a proper replacement. First, lift the vehicle and unscrew the oil filler cap located on top of the engine cover. Then, locate and unscrew the oil drain plug underneath the sump. Position a container to collect the used oil and proceed to unscrew the oil filter using the appropriate tool. Replace the filter with an equivalent model after changing the seal. Finally, close the oil drain plug and refill the system with new lubricant.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD2 Port on a Kia Picanto 2
Where to Find the OBD2 Port on a Kia Picanto 2
Kia Picanto (2011-2018 / TA, MK 2) If you are curious about where the OBD2 port is located on your Kia Picanto second generation (2011-2018), just pay attention to the description in t…
How to reset the TPMS light on the 2015 Kia Picanto
How to reset the TPMS light on the 2015 Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) If the orange tyre light (TPMS) illuminates on the instrument cluster of your second-generation Kia Picanto (2015), it means there is a puncture or a…
How to reset the tyre pressure warning light on the Kia Picanto 3
How to reset the tyre pressure warning light on the Kia Picanto 3
Kia Picanto (2018-2026 / MK 3, JA) In this brief guide, follow the main instructions to reset the tyre pressure monitoring system (TPMS) warning light on the second and third generatio…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos