Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Restore the Door LEDs of the Kia Cadenza

Model: Kia Cadenza YG - Years 2017-2022
Part: Car door

As shown in the video, the passenger side door of the Kia Cadenza has damaged the steel part. Replacement or repair cannot occur without first removing the inner door panel. After removing the plastic panels that cover the screws securing the panel at the handle and window control level, remove the screws. There is another screw that must be removed from the inside, located next to the side mirror. Once you detach the inner panel by prying it off, disconnect the connectors and remove the screws from the handle for easier access. At this point, you can remove the steel sheet and replace it.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Kia Cadenza
How to Replace the Front Brake Pads on a Kia Cadenza
Kia Cadenza (2017-2022 / YG) Follow these main instructions on how to remove and replace the front brake pads on a Kia Cadenza in simple and quick steps. First, lift the vehicle …
How to Replace the Engine Oil and Oil Filter of the Kia Cadenza
How to Replace the Engine Oil and Oil Filter of the Kia Cadenza
Kia Cadenza (2017-2022 / YG) Today, let's look at the procedure to perform routine maintenance by replacing the engine oil and oil filter of the Kia Cadenza. First, lift the vehi…
How to Replace the Alternator on a Kia Cadenza?
How to Replace the Alternator on a Kia Cadenza?
Kia Cadenza (2010-2016 / VG) To replace the alternator on a Kia Cadenza, open the hood to access the components inside the engine bay. You will need to loosen the screws that sec…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos