Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Kia Soul?

Model: Kia Soul MK 2 - Years 2013-2018
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Kia Soul, first ensure all tyres are inflated to the correct pressure. This pressure value is found on the sticker inside the driver's door pillar. Once the tyres are correctly inflated, turn on the ignition and press and hold the reset button for a few seconds; this button is located on the right spoke of the steering wheel. After the reset, you can release the button and turn off the ignition.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Kia Soul EV?
How to Reset the Tyre Pressure Warning Light on the Kia Soul EV?
Kia Soul (2013-2018 / MK 2) For the Kia Soul EV, there is no dedicated button to reset the tyre pressure warning light, nor is there a procedure to follow through the onboard co…
How to Reset the TPMS Light on the Kia Soul
How to Reset the TPMS Light on the Kia Soul
Kia Soul (2008-2014 / MK 1) If you notice the orange light indicating tyre pressure when starting your Kia Soul Mk1, it means the sensor has detected suboptimal pressures. To qu…
How do you reset the tire pressure light in the Kia Soul?
How do you reset the tire pressure light in the Kia Soul?
Kia Soul (2013-2018 / MK 2) Did we notice the tire anomaly warning light come on in the instrument panel of our car, in this case the Kia Soul? Don't worry, most likely we have …

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos