Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Clutch

Model: Kia Soul MK 1 - Years 2008-2014
Part: Clutch

In this brief guide, you will learn how to remove the car clutch in a few steps. The clutch kit consists of the disc, pressure plate, and release bearing. To remove the clutch and achieve the desired goal quickly, you will often need to remove the gearbox as well. Start by removing the front wheels and disconnecting the shock absorbers, carefully removing the pins and the relevant bolts from the hub carrier. Next, detach the lower arm ball joint and the steering rack end. At this point, you will also need to remove the starter motor and drain the gearbox oil. Then begin removing the drive shafts and disconnect the gear lever, finishing with the removal of the clutch cable.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Kia Soul?
Where is the fuse box located in the Kia Soul?
Kia Soul (2008-2014 / MK 1) In this new mini guide dedicated to all of you who own a first-generation Kia Soul (2008-2014), we will discover how to quickly locate the box that c…
How to Remove the Door Panel on Kia Soul
How to Remove the Door Panel on Kia Soul
Kia Soul (2008-2014 / MK 1) Want to remove the door panel of the Kia Soul? Open the car door and see how to take off the cover panel. Unscrew the screw located in the space of t…
How to Replace the Front Headlamp of a Kia Soul
How to Replace the Front Headlamp of a Kia Soul
Kia Soul (2013-2018 / MK 2) Before you start, open the bonnet of your Kia Soul. Begin by unscrewing and removing the bolts that secure the front headlamp to the vehicle. Next, d…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos