Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel filter in a 2001 Lada Niva 1.7

Model: Lada Niva Vaz2121, Vaz2131 - Years: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988
Part: Fuel filter

Video tutorial

In this video tutorial, you can see how to replace the fuel filter in a 2001 Lada Niva 1.7 by following a few simple steps: the first thing to do is to purchase a new, high-quality original fuel filter from an authorised dealer. Lift the bonnet and secure it with the appropriate prop; remove the securing strap from the spare wheel and take it out of its location.

Unscrew the securing bolt (use a ratchet socket spanner) of the filter cover. Once the cover is removed, you will have access to the fuel filter.

Before fitting the new filter, check the arrow indicating the direction of fuel flow. Using a 17mm spanner, unscrew the nuts from the pipes.

Also loosen the clamp nut, then you can remove the filter from its location. Install the new filter and reassemble all parts in reverse order.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seats of a Lada Niva
How to Remove the Rear Seats of a Lada Niva
Lada Niva (1977-2019 / Vaz2121, Vaz2131) To remove the rear seats of the Lada Niva, loosen the screws located at the base of the seats; next, fold down the backrests of the rear seats to acc…
How to Replace the Coolant in the Lada Niva
How to Replace the Coolant in the Lada Niva
Lada Niva (1977-2019 / Vaz2121, Vaz2131) Briefly, we will review the main instructions on how to dismantle and replace the engine coolant in the Lada Niva. First, raise the vehicle and start…
Replacing the Front Brake Pads on the Lada Niva
Replacing the Front Brake Pads on the Lada Niva
Lada Niva (1977-2019 / Vaz2121, Vaz2131) Below are the instructions for removing and replacing the front brake pads on the Lada Niva. First, lift the vehicle and start by removing the front …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos