Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Central Grille with the Logo on a Lancia Musa

Model: Lancia Musa MK 1 - Years 2004-2012
Part: Grille

To remove the central grille with the logo located on the front bumper of a Lancia Musa, open and lift the front bonnet of the car. Using a socket wrench or screwdriver, unscrew the securing pins on the bonnet. Remove the grille from the centre of the bonnet and take out the metal rivets to detach the logo. Once all parts are removed, reassemble by securing the logo onto the grille, tightening the rivets. Finally, tighten all the pins around the grille. Check the correct mounting of the pieces.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Logo from Lancia Musa
Removing the Logo from Lancia Musa
Lancia Musa (2004-2012 / MK 1) Removing the manufacturer's logo from the Lancia Musa? Here’s how to detach it from the front bonnet. Use a heat gun to warm up the old logo (as show…
How to Remove the Airbag and Steering Wheel of the Lancia Musa
How to Remove the Airbag and Steering Wheel of the Lancia Musa
Lancia Musa (2004-2012 / MK 1) This guide provides instructions on how to remove and replace the airbag and steering wheel of the Lancia Musa. First, get inside the vehicle and sta…
How to Remove the Cabin Air Filter from a Lancia Musa
How to Remove the Cabin Air Filter from a Lancia Musa
Lancia Musa (2004-2012 / MK 1) Before you can start, sit in the front passenger seat of your Lancia Musa. Begin by removing the glove compartment by unscrewing the relevant fixing …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos