Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Delta
    4. : Lancia Delta front grille disassembly

Lancia Delta - Video tutorial

Model: Lancia Delta MK 1 - Years 1979-1993
Part: Grille
Operation: Lancia Delta front grille disassembly

In this video tutorial we will see how to unhook the front grille of a Lancia Delta first series. First we are going to remove the grids that we find near the front arrows, levering with something pointed and thin: then we are going to remove the bolt that we find below using a ratchet wrench with extension (perform the same thing also from the other party). At this point we are going to unclip our front bumper, pulling it towards you, and we are going to unscrew the screws of our mask that will allow us to remove it, as shown in the video!


Posted on 26 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos