Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front spring pads on the Lancia Fulvia

Model: Lancia Fulvia MK 1 - Years 1965-1976
Part: Suspension system

The main instructions in this guide will illustrate how to disassemble and replace the front spring pads on the Lancia Fulvia. First, raise the vehicle to access the front springs; to remove the pads, it will be necessary to compress the spring using a specific tool that will apply compressive force, as shown in the video. At this point, remove the old pads from the springs and replace them with the new original ones; reassemble the pads and release the springs back into position.

Posted on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Cylinder Head of the Lancia Fulvia
How to Dismantle the Cylinder Head of the Lancia Fulvia
Lancia Fulvia (1965-1976 / MK 1) The instructions in this guide will show you how to dismantle the cylinder head of the Lancia Fulvia. First, open the bonnet of the vehicle and disco…
How to Repair the Windscreen Washer System on the 1966 Lancia Fulvia
How to Repair the Windscreen Washer System on the 1966 Lancia Fulvia
Lancia Fulvia (1965-1976 / MK 1) Let’s see how to repair the windscreen washer system on the 1966 Lancia Fulvia: the manual pump has no internal valves, and the system requires non-r…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos