Do it yourself
Frequently asked questions about cars and motorcycles

How to Dismantle the Cylinder Head of the Lancia Fulvia

Model: Lancia Fulvia MK 1 - Years 1965-1976
Part: Cylinder head

The instructions in this guide will show you how to dismantle the cylinder head of the Lancia Fulvia. First, open the bonnet of the vehicle and disconnect the battery; then disconnect the spark plug cables, removing them with a socket spanner with an extension. Next, disconnect the throttle body cable and remove the fuel filter, then unscrew the screws of the cylinder head cover; subsequently, unscrew all the cylinder head bolts, carry out the repair, and replace the gasket, following the video tutorial to the end!

Posted on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Lancia Fulvia (1965-1976 / MK 1) The main instructions in this guide will illustrate how to disassemble and replace the front spring pads on the Lancia Fulvia. First, raise the vehic…
Lancia Fulvia (1965-1976 / MK 1) Let’s see how to repair the windscreen washer system on the 1966 Lancia Fulvia: the manual pump has no internal valves, and the system requires non-r…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos