Do it yourself
| ||||
|
Lancia Ypsilon - Video tutorial
Model: Lancia Ypsilon
MK 2, 843, Ypsilon 2, Y2
- Years 2003-2011 To clean the throttle body, the air box must first be disassembled, using a 10 mm hex wrench; it is better to carry out this operation with a cold engine. If you see that the air box does not come off it means that there is also a third pressure screw. You now have access to the throttle body. For cleaning used a cleaner for mechanical parts; if the throttle body is not particularly dirty, you can also clean it without removing it. After an initial cleaning, you must perform another cleaning, this time with the engine running and giving the accelerator gas; you can also clean the pressure sensor which is housed on the intake manifolds (use a cleaner for electrical contacts), spray at a distance without using paper. Then reassemble the piece.
Posted on 29 April 2024 by ScegliAuto
How to replace the front emblem on the Lancia Ypsilon.
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) In today's video, we will see how to disassemble and replace the front logo on the second series of the Lancia Ypsilon. This operation proves to be v
How to disassemble the car radio of a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) Before we can begin, we will have to go and sit in the driver's seat of our Lancia Ypsilon. So let's start by inserting the special extractor keys in
How to mount a rear bumper on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) How to fit a rear bumper on a Lancia Ypsilon? Let's see together how to proceed, an operation not too complex if you proceed in order. First of all w Other guides that may interest you
|
How do you replace the horn on the Citroà «n Berlingo?In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |