Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cylinder Head Gasket in a 1998 Lancia Ypsilon

Model: Lancia Ypsilon Y1, Ypsilon 1, MK 1, 840 - Years 1996-2003
Part: Cylinder head

This video explains how to remove the cylinder head gasket in a 1998 Lancia Ypsilon. First, after opening the front bonnet, you need to remove the air filter, the timing belt cover, the connector, and the RPM sensor. Next, you can remove the flywheel and the auxiliary belt, disconnect the temperature sensor, adjust the crankshaft, drain the coolant, and remove the timing belt. At this point, disconnect the injector, lambda sensor, oxygen sensor, coils, battery, thermostat, and manifolds. Once you reach the cylinder head, unscrew the bolts in sequence and carry out the necessary repair and replacement work, then reassemble everything.

Updated on 6 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Front Seat Folding Handle on a Lancia Ypsilon
How to Remove the Front Seat Folding Handle on a Lancia Ypsilon
Lancia Ypsilon (1996-2003 / Y1, Ypsilon 1, MK 1, 840) Before starting, open the front door of your Lancia Ypsilon. Begin by lowering and holding the seat folding handle, then unclip and move the internal…
How to Remove the Radio from a Lancia Ypsilon
How to Remove the Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you can begin, sit in the driver's seat of your Lancia Ypsilon. Start by inserting the appropriate extraction keys into the four holes on the …
Disassembly and replacement of the speakers of the Lancia Ypsilon
Disassembly and replacement of the speakers of the Lancia Ypsilon
Lancia Ypsilon (1996-2003 / Y1, Ypsilon 1, MK 1, 840) Today we will see the instructions for disassembling and replacing the front speakers of the Lancia Ypsilon. First, we open the front door of the car…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos