Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

On the Lancia Thesis, Access to the Timing Belt is Possible Without Removing the Camshaft Covers

Model: Lancia Thesis MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Timing belt

Video tutorial

While on most vehicles it is necessary to remove several parts of the engine bay to access the timing belt, the Lancia Thesis designers created a dedicated access point that makes inspecting and replacing the belt much simpler. To access the passenger side wheel arch, turn the steering wheel fully to the left; the wheel arch is secured with screws and plastic clips; remove the plastic inner wing, revealing a large area of the lateral engine compartment, showing the space that houses the steering pulley, alternator, and, importantly, the timing belt cover.

By removing the screws from the cover, you gain direct and easy access to the timing belt, pulleys, and tensioner.


Posted on 16 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlight on the Lancia Thesis
How to Remove the Front Headlight on the Lancia Thesis
Lancia Thesis (2002-2009 / MK 1) In this short video, you will learn how to remove the front headlight from a Lancia Thesis, following the instructions below. First, open and lift th…
How to reset the service light on a Lancia Thesis
How to reset the service light on a Lancia Thesis
Lancia Thesis (2002-2009 / MK 1) To reset the service light on a Lancia Thesis, get inside the vehicle and turn on the instrument panel without starting the engine. Locate the reset …
Removing the Door Panel on a Lancia Thesis
Removing the Door Panel on a Lancia Thesis
Lancia Thesis (2002-2009 / MK 1) In this video, we will see step-by-step instructions for removing the front door panel on a first series Lancia Thesis. First, open the front door an…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos