Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Lancia Ypsilon 1.4 16V

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Timing belt

Follow today's instructions to dismantle and replace the timing belt on the Lancia Ypsilon 1.4 16V. First, open the bonnet and begin removing the engine mount by unscrewing the fixing bolts; then remove the timing cover, as shown in the video. At this point, take the necessary references for replacing the timing belt, loosening the tensioner to remove it; also replace the water pump kit if necessary, installing the original toothed belt!

Updated on 20 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Cylinder Head Gasket in a 1998 Lancia Ypsilon
Lancia Ypsilon (1996-2003 / Y1, Ypsilon 1, MK 1, 840) This video explains how to remove the cylinder head gasket in a 1998 Lancia Ypsilon. First, after opening the front bonnet, you need to remove the ai…
Where is the fuse box of the Lancia Ypsilon 2 located?
Where is the fuse box of the Lancia Ypsilon 2 located?
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In this new guide, we will help you identify in a few simple steps the fuse box located inside your second edition Lancia Ypsilon. First of all, ente…
How to Remove the Radio from a Lancia Ypsilon
How to Remove the Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you can begin, sit in the driver's seat of your Lancia Ypsilon. Start by inserting the appropriate extraction keys into the four holes on the …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos