Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Mount on a Lancia Ypsilon

Model: Lancia Ypsilon Y2, MK 2, 843, Ypsilon 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine mount

See other generations:
Video tutorial

Learn how to replace the engine mount on a Lancia Ypsilon. Pull the lever to open the engine compartment and lift the bonnet, securing it. Position a jack under the engine and lift it (until the engine mount is released).

Remove the bolts of the engine mount, unscrewing the remaining fastening bolts around the engine mount plate (access from the engine compartment). Finally, extract the part from the engine compartment and replace it with the new one, tightening the bolts around the mount.

After assembly, close the engine bonnet.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Lancia Ypsilon 1.4 16V
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Follow today's instructions to dismantle and replace the timing belt on the Lancia Ypsilon 1.4 16V. First, open the bonnet and begin removing the eng…
How to Replace the Brake Pads on a Lancia Ypsilon
How to Replace the Brake Pads on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) The first step to replace the brake pads on a Lancia Ypsilon is to remove the wheel. Start by loosening the bolts and then lift the vehicle for easie…
How to Remove the Radio from a Lancia Ypsilon
How to Remove the Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Before you can begin, sit in the driver's seat of your Lancia Ypsilon. Start by inserting the appropriate extraction keys into the four holes on the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos