Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Windscreen Washer System on the 1966 Lancia Fulvia

Model: Lancia Fulvia MK 1 - Years: 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976
Part: Windshield wipers

Video tutorial

Let’s see how to repair the windscreen washer system on the 1966 Lancia Fulvia: the manual pump has no internal valves, and the system requires non-return valves and pipes. Therefore, check the existing valves, ensuring that the non-return valve in the pipes allows flow in only one direction.

If necessary, replace it with a new one, or clean it as shown by the YouTuber, using a thin copper tube to clear the blocked nozzles. These are adjustable with a flat-head screw.

The valve has only one correct direction: the one that prevents fluid from returning to the reservoir on entry, and on exit prevents fluid from being sucked back into the pump from the nozzles. Perform a final test: pump manually and hold before releasing for optimal pressure.

Adjust the height of the nozzles.


Posted on 23 May 2026 by ScegliAuto


Related tutorials

Replacement of the front spring pads on the Lancia Fulvia
Replacement of the front spring pads on the Lancia Fulvia
Lancia Fulvia (1965-1976 / MK 1) The main instructions in this guide will illustrate how to disassemble and replace the front spring pads on the Lancia Fulvia. First, raise the vehic…
How to Dismantle the Cylinder Head of the Lancia Fulvia
How to Dismantle the Cylinder Head of the Lancia Fulvia
Lancia Fulvia (1965-1976 / MK 1) The instructions in this guide will show you how to dismantle the cylinder head of the Lancia Fulvia. First, open the bonnet of the vehicle and disco…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos