Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Horn on a Lancia Y

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Checks and maintenance

This video clearly shows where the horn is located and the exact procedure to work safely and correctly replace the part. First, lift the car with a jack on the front passenger side. Then, use a jack stand to secure the car for safe working, as the horn is located, as shown in the video, inside the front bumper near the fog light. To access it, you need to get under the car, disconnect the electrical connectors marking them to avoid confusion when fitting the new horn. Then, using a 10mm spanner, unscrew the bolt holding the bracket with the horn attached. Once removed, simply detach the bracket from the old horn by unscrewing the bolt with a 10mm spanner and reassemble everything in reverse order.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the horn located on a 2016 Lancia Ypsilon?
Where is the horn located on a 2016 Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) Do you have a 2016 Lancia Ypsilon and want to know where the horn is located? The creator of this video can clear up all your doubts and answer your …
How to Remove the Third Brake Light Bulb from a Lancia Ypsilon
How to Remove the Third Brake Light Bulb from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you begin, open the rear boot lid of your Lancia Ypsilon. Start by prising out the two rubber plugs. This will give you access to the two clip…
Replacing the Third Brake Light Bulbs in a Lancia Ypsilon
Replacing the Third Brake Light Bulbs in a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In this video tutorial, you will learn how to remove and replace the bulbs of the third brake light in a Lancia Ypsilon. First, remove the third brak…

    Frequently Asked Questions

    • Ypsilon 2003-2011 - What is the position of the Lancia Ypsilon OBD port? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos