Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alloy Wheel Centre Cap on a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Checks and maintenance

Before you can start, exit the cabin of your Lancia Ypsilon. Head towards the alloy wheel from which you need to remove the centre cap. Next, insert the tip of a screwdriver into the gap between the centre cap and the wheel rim, and lever it out. This will release the internal clips that secure the centre cap. At this point, you can pull the centre cap out of its seat, completing the removal. To fit the new centre cap, simply reverse this procedure, and you will have finished the replacement.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Brake Disc on a Lancia Ypsilon
How to Remove the Front Brake Disc on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) To remove the front brake disc on a Lancia Ypsilon, position your car on a column lift or jack, raising it to a comfortable working height. Unscrew t…
How to Replace the Front Brake Pads on a Lancia Ypsilon
How to Replace the Front Brake Pads on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) How to remove and replace the front brake pads on a Lancia Ypsilon. Position your car on a column lift, raising it to a comfortable height for work. …
How to Replace the Front Brake Pads on a Lancia Ypsilon
How to Replace the Front Brake Pads on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Lift the car using a column jack to the desired height. Next, remove the wheel using a telescopic wrench or air drill along with the respective bolts…

Other guides you may be interested in

    Frequently Asked Questions

    • Ypsilon 2003-2011 - What is the position of the Lancia Ypsilon OBD port? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos