Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Delta
    4. : Disassembly of the instrument panel on Lancia Delta

Lancia Delta - Video tutorial

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Instrument cluster
Operation: Disassembly of the instrument panel on Lancia Delta

Removing the instrument panel on the Lancia Delta is very simple and in this short video we explain how to do it. It is fixed by some clips in the lower part, where there is the cloth that covers the steering column. Then take this sheet out of the attachments. After that, unscrew the two screws that secure it in the upper part and two other screws in the lower part: if you don't know where they are, they are all well indicated in the video. If you also want to remove the protection under the steering column, you will have to unscrew two additional screws. Remember to disconnect the connector when removing the panel.


Posted on 1 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Delta 2008-2014 - Where is the meaning of the warning lights on the Lancia Delta? Read Answer
    • Delta 2008-2014 - What to do if the Lancia Delta's Blue & Me system does not work? Read Answer
    • Delta 2008-2014 - Meaning of Lancia Delta warning lights? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos