Do it yourself
Frequently asked questions about cars and motorcycles

How to restore the service of the Range Rover L494

Model: Land Rover Range Rover MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

In this article, we will see how to reset the service indicator of the Range Rover L494. To reset this indicator, first open the driver's door. After opening the door, start the instrument panel without starting the engine.

Then press and hold the brake pedal and the accelerator pedal simultaneously. Wait until the message "SERVICE RESET" appears on the instrument panel, then release the pedals and restart the panel to verify that the reset has been done correctly.

It is recommended to reset only after having the vehicle serviced, and as we have seen, it takes little time to do so.


Posted on 18 October 2025 by ScegliAuto


Related tutorials

Land Rover Range Rover (2012-2021 / MK 2) In this video, learn how to reset the service on the Range Rover Sport L494: first, turn on the ignition, then open the hood using the lever and also…
Land Rover Range Rover (2012-2021 / MK 2) In today's article, we show you how to reset the maintenance light on the Range Rover Sport, a procedure we recommend only in case the reset is not d…
Land Rover Range Rover (2022-2026 / L460) If the service light on the instrument panel of your Range Rover L460 continues to stay on even after you have already had the car serviced, then the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos