Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Console on Range Rover Sport

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Center console tunnel

See other generations:
Video tutorial

Let’s see how to remove the center console on a Range Rover Sport. Use a plastic trim tool to pry off the cover located on the top of the center console, and remove the leather shift boot with the knob.

After removing the plastic cover, unscrew the fastening screws inside the center console with a screwdriver. Once this is done, pull out the console and disconnect any power cables.

Finally, insert the new piece into the center console area and reassemble all the components of the glove compartment as you disassembled them earlier.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Range Rover Sport
How to Set the Time on a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Before you begin, sit in the driver's seat of your Range Rover Sport. Start by activating the onboard computer by pressing the power button located o…
Fuse Box Diagram and Location for the Land Rover Range Rover Sport
Fuse Box Diagram and Location for the Land Rover Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) In this guide, see how to locate the diagram and positioning of the fuse boxes for the Land Rover Range Rover. First, get inside the vehicle and lowe…
How to Disconnect the Battery on a Range Rover Sport L494
How to Disconnect the Battery on a Range Rover Sport L494
Land Rover Range Rover (2012-2021 / MK 2) Before leaving your Range Rover Sport parked for a while, whether for a trip or other reasons, you may need to disconnect the battery to avoid an unp…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos