Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2017 Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

Remembering the service interval for your vehicle can be a challenge, which is why the service light helps. It is programmed to illuminate after a certain time or mileage.

In service centers, the first step is to perform the necessary maintenance, then the warning is cleared as shown in the video: connect a diagnostic tool to the vehicle's OBD port via cable, interface with the ECU, configure the program, select the vehicle, etc., access the active warning section, and proceed to turn off the warning.


Posted on 17 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Land Rover Evoque
How to Reset the Service Light on a Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) To reset the Service light on a Land Rover Evoque, open the hood and the driver's door, then turn the ignition key to the 'On' position. This will di…
How to Reset the Service Light on a Land Rover Evoque
How to Reset the Service Light on a Land Rover Evoque
Land Rover Evoque (2018-2026 / MK 2, L551) To reset the Service light that appears on the instrument cluster of a Land Rover Evoque, pull the lever located near the footwell to unlock the hood…
How do you reset the Service light of the Land Rover Evoque?
How do you reset the Service light of the Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) On the instrument panel of the Land Rover Evoque, the Service light that is displayed can be reset by opening the hood and the driver's door, then tu…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos