Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Sway Bar on a Land Rover Defender

Model: Land Rover Defender MK 5 - Years 1983-1990
Part: Anti-roll bar

Let's see how to remove the sway bar from the Land Rover Defender. Position your vehicle on a column lift and raise it to a comfortable working height; using a socket wrench, remove the sway bar bolts on the right and left sides. Remove the bolts located under the plate that holds the sway bar, then take the sway bar out of its mount, using a hammer if necessary. Install the new sway bar, then start attaching it with all the associated bolts. Reinstall the previously removed bolts on the right and left sides. Check to ensure the sway bar is properly mounted under the vehicle.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Land Rover Defender (1990-2016 / MK 6) In today's video tutorial, you will learn how to remove and replace the steering gear on the Land Rover Defender MK6, following the instructions belo…
Land Rover Defender (1990-2016 / MK 6) If you want to locate the fuse box in your Land Rover Defender (2007-2011) on your own, just carefully read the following guide and put into practice…
Land Rover Defender (1983-1990 / MK 5) Discover how to remove and replace the fuel filter on the first series Land Rover Defender by following these simple steps. First, open the hood of y…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos