Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : Land Rover Discovery thermostat disassembly

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery Discovery 3, L319, MK 3, LR3 - Years 2004-2010
Part: Thermostat
Operation: Land Rover Discovery thermostat disassembly

In this video tutorial we will see the main steps to be able to replace the thermostat of a Land Rover Discovery. First of all, lift the engine hood and start removing the radiator hose clamps, unscrewing them with a socket wrench: then let all the coolant drain. At this point we are going to disconnect the thermostat from the pipe and replace it with the new one. Bleed the coolant and then insert the new one in the special tank; reassemble everything, remembering to tighten the hose clamps well.


Posted on 20 December 2023 by ScegliAuto



Where is the OBD port located on the 2016 Land Rover Discovery?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Finding the OBD port in your Land Rover Discovery fourth series (year 2016) is really simple, and thanks to the following guide, it will literally ta
Land Rover Discovery 3.0 TDI water pump disassembly
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) In this video tutorial we will see how to disassemble the water pump of a Land Rover Discovery first series. We will go, therefore, to see what are t
Battery removal in the Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Removing the battery of a Land Rover Discovery? We open the hood and see the disassembly of the battery. We lift up the front hood, releasing the loc

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos