Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Alternator from a Land Rover Discovery

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Alternator

See other generations:
Video tutorial

How do you remove the alternator from a Land Rover Discovery? Let's see how to take the part out from inside the engine compartment. Lift the hood, remove the soundproofing panel that covers the engine.

Start by loosening the bolts on the side of the alternator. Grab the belt connected to the alternator and disconnect the ventilation hoses if they obstruct the removal.

Pull the alternator out from the engine compartment. Connect the electrical terminals to the new alternator, and reconnect the ventilation hoses.

Before reinstalling all the cover pieces, test the proper operation of the alternator.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Replace the Alternator on a Land Rover Discovery
How to Replace the Alternator on a Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Let's see how to replace the alternator on a Land Rover Discovery. Pull the lever located at the bottom left of the dashboard and lift the hood, secu…
Where to Find the OBD Port of the 2016 Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Finding the OBD port in your 2016 Land Rover Discovery is very simple, and with the following guide, it will literally take you just a few seconds. F…
Removing Speaker from Land Rover Discovery 2
Removing Speaker from Land Rover Discovery 2
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) In this video tutorial, you will learn how to remove the front speaker from a Land Rover Discovery 2. First, open the front door and detach the door …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos