Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery in a Range Rover

Model: Land Rover Range Rover MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

Start by removing the physical emergency key from inside the key fob by pressing the button located on the lower side of the Range Rover key. Next, open the electronic key in two halves using the emergency key and prying it apart. This will give you access to the dead battery inside the key. Proceed to extract the battery from its compartment using a flathead screwdriver to pry it out. Once you complete this step, you can remove the battery, finishing the disassembly.

To install the new battery and close the key, simply reverse these instructions, and the replacement will be complete.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Land Rover Range Rover?
How to Replace the Battery in a Land Rover Range Rover?
Land Rover Range Rover (2002-2012 / L322, MK 3) To replace the battery in a Land Rover Range Rover, lift the key to pry inside its housing: this will allow you to open the fob and access the compon…
How to Replace the Key Fob Battery on a Land Rover Range Rover?
How to Replace the Key Fob Battery on a Land Rover Range Rover?
Land Rover Range Rover (2012-2021 / MK 2) To replace the battery in the key fob of a Land Rover Range Rover, detach the chrome cover from the top of the device, which is attached to the emerg…
How to Replace the Key Fob Battery on a Land Rover Range Rover Sport?
How to Replace the Key Fob Battery on a Land Rover Range Rover Sport?
Land Rover Range Rover (2002-2012 / L322, MK 3) To replace the key fob battery on a Land Rover Range Rover Sport, lift the key by pressing the designated button. Next, unscrew the small screw locat…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos