Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : Key battery replacement on Land Rover Discovery

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery L462, MK 5, Discovery 5 - Years 2017-2023
Part: Key
Operation: Key battery replacement on Land Rover Discovery

Remove the side door of the remote control, under which the manual key is located. Take out the same key and use it to divide the remote control casing into two halves, as shown in the video (or use a small flat head screwdriver). VoilÃ! Now you will find the much sought after battery in front of you. Extract them and insert the new one you bought: it can be found in any hardware store or in large supermarkets. Reassemble everything obviously proceeding backwards: join the two middle lines of the casing, reinsert the manual key and reassemble the side door.


Posted on 19 January 2024 by ScegliAuto



Battery removal in the Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Removing the battery of a Land Rover Discovery? We open the hood and see the disassembly of the battery. We lift up the front hood, releasing the loc
Land Rover Discovery battery replacement
Land Rover Discovery (2004-2010 / Discovery 3, L319, MK 3, LR3) Let's see how to remove and replace the battery of a second series Land Rover Discovery, following these simple instructions. First we open and lift
How to replace the remote control battery of Land Rover Discovery 4?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) In this tutorial we can see how to replace the Land Rover Discovery 4 remote control battery. For this simple operation we do not need any tools, but

Other guides that may interest you

    Frequently Asked Questions

    • Discovery 2004-2010 - What to do if your Land Rover Discovery key doesn't work? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos