Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Land Rover Freelander 2

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

This guide shows how to reset the oil change light on a Land Rover Freelander 2. Insert the key into the ignition; with the ignition on, press the TRIP button (located at the bottom of the right dial) and then the ignition button of the vehicle. Do not press the brake pedal during this operation, otherwise, the vehicle will start.

Once the button is pressed, a system check will begin. At this point, the display on the right dial will show "dist" or "date", indicating the mileage and time until the next oil change service.

By holding down the TRIP button, you can reset the current entry. Pressing the TRIP button on the "end" entry will complete the reset procedure.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Land Rover Freelander 2?
How to Reset the Service Light on the Land Rover Freelander 2?
Land Rover Freelander (2006-2016 / Freelander 2) To reset the service light on the Land Rover Freelander 2, press and hold the button located on the right side of the instrument cluster, just below …
How to Reset the Service Light on a Land Rover Freelander 2
How to Reset the Service Light on a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) To manually reset the service light that stays on the dashboard of your Land Rover Freelander Mk2, read the following guide and follow the steps desc…
Replacement of the engine oil and oil filter of the Land Rover Freelander TD4.
Replacement of the engine oil and oil filter of the Land Rover Freelander TD4.
Land Rover Freelander (1997-2006 / Freelander 1) These short and simple instructions will show us how to carry out the routine maintenance service, replacing the engine oil and oil filter, of the La…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos