Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Land Rover Evoque?

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Service warning light

Resetting the service mileage and days counter on the Land Rover Evoque is very simple. This procedure should only be performed after completing the required maintenance tasks. To proceed with the reset, enter the cabin and close the door. Turn on the ignition, press the button to open the hood, and open the door. At this point, press the brake pedal and the accelerator pedal down simultaneously for 30 seconds. After that, release the pedals, turn off the ignition, and turn it back on to verify that the procedure was successful.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Land Rover Evoque?
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2018-2026 / L551, MK 2) To reset the Service light on a Land Rover Evoque, first turn on the instrument panel using the appropriate button. Next, pull the lever to open the …
How to Reset the Service Light on a Land Rover Evoque?
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) .. In this tutorial, you will learn how to reset the service light on a Land Rover Evoque. This is a simple and quick operation that should.. …
How to Reset the Service Light on a Land Rover Evoque?
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2018-2026 / L551, MK 2) .. In this tutorial, you will see how to reset the service light on a Land Rover Evoque, a very simple and quick operation. Before proceeding,.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos