Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Service Light on the Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

Today, let's go over the instructions on how to reset the maintenance service light for the engine oil change on the Land Rover Evoque. First, get inside the vehicle and turn on the ignition; then press and hold both pedals (brake and accelerator) and press the Start button, as shown in the video.

At this point, you will see that the engine oil change warning message will be reset on the instrument panel; then turn off the ignition and start the engine, thus completing the service reset procedure!


Updated on 30 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Land Rover Evoque?
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To reset the Service light on a Land Rover Evoque, turn on the ignition and navigate through the menu using the buttons on the right side of the stee…
How to Reset the Service Light on a Land Rover Evoque?
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To reset the Service light on a Land Rover Evoque, turn on the ignition and navigate through the menu using the buttons on the right side of the stee…
Resetting the Service Light on the Land Rover Range Rover Evoque MK1
Resetting the Service Light on the Land Rover Range Rover Evoque MK1
Land Rover Evoque (2011-2018 / L538, MK 1) In this video, you will see the engine oil change on the Land Rover Range Rover Evoque. You need to reset the system that alerts you with a message o…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos