Do it yourself
| ||||
|
Land Rover Evoque - Video tutorial
Model: Land Rover Evoque
MK 1, L538
- Years 2011-2018 The Service light reset on the Land Rover Evoque is done by turning on the instrument panel and navigating through the menu using the buttons located on the right side of the steering wheel. You will need to select the "Vehicle Information" option by pressing the OK button, which is also located on the right side of the steering wheel. Another menu will appear with the "Oil Service" option that needs to be selected: by selecting this option, you will be able to reset the light by pressing the RES button located in the lower center of the steering wheel. Once the operation is complete, you can turn off the instrument panel by removing the key.
Posted on 18 May 2024 by ScegliAuto
How do you reset the Land Rover Evoque Service light?
Land Rover Evoque (2011-2018 / MK 1, L538) The Land Rover Evoque Service warning light can be reset by going inside the passenger compartment and turning on the instrument panel, after inserti
How do you reset the Service light on the Land Rover Evoque?
Land Rover Evoque (2011-2018 / MK 1, L538) On the Land Rover Evoque, it is possible to reset the Service light by turning on the instrument panel, inserting the appropriate ignition key, and p
To reset the service of a Land Rover Evoque.
Land Rover Evoque (2018-2024 / MK 2, L551) To reset the service light on a Land Rover Evoque without a diagnostic tool, after performing a service on your own, you need to follow a different p Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.059
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |