Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Land Rover Evoque?

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

On the Land Rover Evoque, you can reset the Service light by turning on the ignition, inserting the key, and pressing the button to activate the dashboard. Once the dashboard is on, press and hold the brake and accelerator pedals simultaneously.

Hold them for a few seconds until the Service light completely disappears from the dashboard. After this operation, you can turn off the ignition completely and then turn it back on to verify that the reset was successful.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To reset the Service light on a Land Rover Evoque, enter the cabin and turn on the ignition after inserting the key. Once the ignition is on, open th…
How to Reset the Service Light on a 2021 Land Rover Evoque
How to Reset the Service Light on a 2021 Land Rover Evoque
Land Rover Evoque (2018-2026 / MK 2, L551) In this new mini guide dedicated to your 2021 Land Rover Evoque, we will discover how to manually reset the service light that keeps appearing on the…
How to Reset the Service Light on a Land Rover Evoque
How to Reset the Service Light on a Land Rover Evoque
Land Rover Evoque (2018-2026 / MK 2, L551) To reset the service light on a Land Rover Evoque without a diagnostic tool, after performing the maintenance yourself, proceed exactly the opposite …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos