Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Land Rover Evoque

Model: Land Rover Evoque L551, MK 2 - Years 2018-2026
Part: Warning light – error code

To reset the service light on a Land Rover Evoque without a diagnostic tool, after performing the maintenance yourself, proceed exactly the opposite of any other type of vehicle. Here, you need to keep the driver's door open. Additionally, you must keep the hood open. Turn on the ignition and press the brake and accelerator pedals fully for 60 seconds. After completing this step, turn off the ignition. Now you can start the vehicle's engine and verify that the service light is indeed off.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Range Rover Evoque
How to Reset the Service Light on the Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In today's video, we will see how to reset the expired service message on the Land Rover Range Rover Evoque. First, we recommend performing regular m…
How to Reset the Service Light on a Land Rover Evoque?
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2018-2026 / L551, MK 2) To reset the Service light on a Land Rover Evoque, first turn on the instrument panel using the appropriate button. Next, pull the lever to open the …
How to reset the service light on the Land Rover Evoque
How to reset the service light on the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) .. Today we will explain how to reset the service light on a Land Rover Evoque model 1. The steps to follow are: - turn on the.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos