Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Climate Control Lights on Land Rover Discovery

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Instrument panel light

See other generations:
Video tutorial

Start with the module located to your left of the center dashboard: insert two trim tools (above and below the buttons) and pry from the back to remove the module. Do the same with the right module.

Now that you have created space, you can also remove the center module without any tools, just by pushing with your fingers in the spaces freed by the two side modules, which you can also remove at this point. Disconnect the connectors from the main module and place it on a workbench.

Remove the two side screws to open the module, then unscrew and replace the three bulbs.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Replace the Climate Control Bulbs on a Land Rover Discovery 2
How to Replace the Climate Control Bulbs on a Land Rover Discovery 2
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) In this short video, learn how to replace the climate control bulbs on a second-generation Land Rover Discovery in simple steps. First, get inside th…
Removing the Battery in a Land Rover Discovery
Removing the Battery in a Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Removing the battery from a Land Rover Discovery? Open the hood and let's see how to remove the battery. Lift the front hood by releasing the latch w…
How to Connect the Trailer Wiring on the Land Rover Discovery
How to Connect the Trailer Wiring on the Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) In this brief guide, see the instructions on how to connect the trailer wiring, as well as how to install it on the Land Rover Discovery. First, open…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos