Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio Unit

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

This video tutorial shows how to remove the radio unit from a Land Rover Range Rover. Use a plastic pry tool and gently lift the radio trim; this should allow you to detach the two side clips that hold it in place.

Once removed, you will have access to the two screws, one on each side, that secure the small button panel above the radio. Unscrew them and take it out. Now also unscrew the four screws that hold the radio unit.

You can then remove it, but first, disconnect the clip located at the bottom of the unit. Now all that’s left is to disconnect the four electrical connections at the back of the radio unit!


Updated on 11 February 2026 by ScegliAuto


Related tutorials

How to Replace the Handle on a Land Rover Range Rover
How to Replace the Handle on a Land Rover Range Rover
Land Rover Range Rover (2002-2012 / L322, MK 3) To perform this simple and quick operation, follow this practical and brief video guide. To proceed with the replacement, remove the door panel and t…
How to Remove the Navigation Screen on a Range Rover Sport?
How to Remove the Navigation Screen on a Range Rover Sport?
Land Rover Range Rover (2002-2012 / L322, MK 3) To remove the navigation screen on a Range Rover Sport, first remove the plastic cover around the radio controls by disengaging the appropriate clips…
How to Replace the Key Fob Battery for the Range Rover Sport?
How to Replace the Key Fob Battery for the Range Rover Sport?
Land Rover Range Rover (2002-2012 / L322, MK 3) To replace the battery in the Land Rover Range Rover Sport key fob, you need a small flathead screwdriver and a replacement battery, model CR2032. Fi…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos