Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Navigation Screen on a Range Rover Sport?

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the navigation screen on a Range Rover Sport, first remove the plastic cover around the radio controls by disengaging the appropriate clips. Next, perform the same operation to remove the plastic covers located on the sides of the radio, near the glove compartment and the steering column.

This will provide access to the screws near the display, which must be loosened to remove the screen. By disconnecting the connector, the screen can be removed and replaced with a new replacement part.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Range Rover Sport
How to Set the Time on a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Before you begin, sit in the driver's seat of your Range Rover Sport. Start by activating the onboard computer by pressing the power button located o…
Replacing the Battery in the Land Rover Range Rover Sport
Replacing the Battery in the Land Rover Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) Today, let's go through the instructions to remove and replace the battery in the Land Rover Range Rover Sport. First, open the trunk and start by re…
How to Replace the Serpentine Belt on the Land Rover Range Rover Sport V8
How to Replace the Serpentine Belt on the Land Rover Range Rover Sport V8
Land Rover Range Rover (2002-2012 / L322, MK 3) In today's video tutorial, you will see the procedure needed to disassemble and replace the serpentine belt on the Land Rover Range Rover, including …

    Frequently Asked Questions

    • Range Rover 2012-2021 - What does the Land Rover Range Rover "Limited SOS Function" mean? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos