Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Range Rover
  6. : How to replace the service belt on the Land Rover Range Rover Sport V8

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover L322, MK 3 - Years 2002-2012
Part: V-belt
Operation: How to replace the service belt on the Land Rover Range Rover Sport V8

In today's video tutorial we will see the procedure we will need to remove and replace the service belt on the Land Rover Range Rover, also in the Sport version with V8 engine. First we open the bonnet of our car and start by unscrewing the fixing screws of the air filter box cover, in order to remove it (disconnecting it from the sleeve); then we remove the fan cover and disconnect the electrical connector. At this point we are going to loosen the pretensioner to remove and replace the V-belt, as shown in the video!


Posted on 6 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos