Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace and Modify the Reverse and Fog Light Bulbs on a Land Rover Freelander 1

Model: Land Rover Freelander Freelander 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Tail light

See other generations:
Video tutorial

To replace the reverse and fog light bulbs with LEDs, start by removing the bulbs from their packaging; we have chosen 15 mm bayonet fitting bulbs. First, unscrew the 3 screws of the rear light using a T20 Torx screwdriver, detach the light, and slightly rotate the bulb holder with the reverse bulb to extract it. Then, press the bulb slightly and rotate it to remove it. For the reverse bulb, insert the yellow LED into the bulb holder, pushing it slightly, rotate it, and insert the bulb holder into the light housing, turning it slightly.

For the fog light bulb, disconnect the connector from the bulb holder, rotate the holder slightly, and remove it. To remove the bulb, push it slightly and rotate it. For the fog light, insert the white LED into the bulb holder, push it slightly, rotate it, and reconnect the plug.

Finally, remount the light, tighten the Torx screws, test the new LEDs, and move to the other side.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Remove the Air Vents in a Land Rover Freelander 2
How to Remove the Air Vents in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video tutorial shows how to remove the air vents in a Land Rover Freelander 2. First, remove and extract the plastic panels located at the sides…
How to Remove the Auxiliary Belt on a Land Rover Freelander
How to Remove the Auxiliary Belt on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…
How to Replace the EGR Valve in a Land Rover Freelander 2
How to Replace the EGR Valve in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video clearly describes the procedure for removing and replacing the EGR valve in a Land Rover Freelander 2. After opening the bonnet and removi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos