Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Land Rover Evoque?

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on a Land Rover Evoque, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, make sure you have completed all required scheduled maintenance tasks.

Start by entering the cabin, then turn on the ignition, open the passenger door, and subsequently the hood. At this point, press down both the brake pedal and the accelerator pedal and hold them in position for about 30 seconds.

Finally, turn off the ignition, turn it back on, and check that the procedure was successful.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Land Rover Evoque?
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) .. In this tutorial, you will see how to reset the service light on a Land Rover Evoque, a very simple and quick operation to perform only.. …
How to Reset the Service Light on a Land Rover Evoque?
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) On the Land Rover Evoque, you can reset the Service light by turning on the ignition, inserting the key, and pressing the button to activate the dash…
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To reset the Service light on a Land Rover Evoque, enter the cabin and turn on the ignition after inserting the key. Once the ignition is on, open th…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos