Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing LED Interior Lights

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Accessory kit

See other generations:
Video tutorial

Installing LED interior lights will give the vehicle a much more modern and appealing look while significantly improving the brightness of the cabin; before proceeding, it is recommended to have a plastic pry tool to detach the cover of the light fixtures without damaging them (some kits include this tool with the bulbs); start with the front dome light by removing the cover and replacing the bulbs; move on to the vanity lights under the sun visors, the door courtesy lights, and the kick panel lights; also replace the license plate lights and the reverse lights by removing the rear light assembly.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Fuse Diagram for the Range Rover Sport
Fuse Diagram for the Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) This vehicle has two fuse boxes. The first is located in the cabin, immediately to the left of the steering column at the lower part of the dashboard…
How to program a new remote control in the Land Rover Range Rover?
How to program a new remote control in the Land Rover Range Rover?
Land Rover Range Rover (2002-2012 / L322, MK 3) In this tutorial we can see how to program a new remote control in the Land Rover Range Rover, an extremely simple and fast operation. To do this, we…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Land Rover Range Rover (1994-2002 / MK 2) The vehicle in question has two cabin air filters, one on the driver's side and the other on the passenger's side, located externally to the cabin ju…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos