Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Sun Visor Removal Instructions

Model: Land Rover Range Rover MK 2 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Accessory kit

See other generations:
Video tutorial

The driver side sun visor is attached to the headliner with three screws through the left hinge, while on the right side there is a support bracket where the sun visor clips in and out to be rotated and oriented toward the side window; disconnect the sun visor from the right support, rotate it to access the mounting screws of the right bracket more easily, and remove them; then pull the sun visor away from the headliner enough to disconnect the power connector for the vanity light located under the sun visor to complete the removal.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Removing the Sun Visor on the Land Rover Range Rover Sport
Removing the Sun Visor on the Land Rover Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) In this video tutorial, you will learn how to remove and replace the sun visor on the Land Rover Range Rover Sport in simple and quick steps. First, …
Door Panel Removal Instructions
Door Panel Removal Instructions
Land Rover Range Rover (1994-2002 / MK 2) Removing the door panel is straightforward since it is secured with easily accessible screws. The screws are located along the edge of the storage po…
Installing LED Interior Lights
Installing LED Interior Lights
Land Rover Range Rover (2002-2012 / L322, MK 3) Installing LED interior lights will give the vehicle a much more modern and appealing look while significantly improving the brightness of the cabin;…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos