Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on a Land Rover Freelander 2

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

Watch this short video tutorial to learn how to reset the service light on a Land Rover Freelander 2, produced from 2006 to 2016. To start, with the vehicle completely off, press and hold the button on the right side of the speedometer, then turn on the ignition.

Continue to hold the button until the "service" message on the secondary display stops flashing.

Next, briefly press the button to navigate to the "date" option, then press and hold it again until another "service" message appears. After completing this operation, exit the service menu, and you have finished the job.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Remove the Air Vents in a Land Rover Freelander 2
How to Remove the Air Vents in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video tutorial shows how to remove the air vents in a Land Rover Freelander 2. First, remove and extract the plastic panels located at the sides…
How to Remove the Auxiliary Belt on a Land Rover Freelander
How to Remove the Auxiliary Belt on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…
Where is the OBD port on the Land Rover Freelander?
Where is the OBD port on the Land Rover Freelander?
Land Rover Freelander (1997-2006 / Freelander 1) If you own a first-generation Land Rover Freelander and are wondering where the OBD port is located, read this guide and follow the few simple steps …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos