Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Seatbelt Lock Mechanism.

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Seat

See other generations:
Video tutorial

Remove the seat from its housing in the cabin. Remove the bolt that connects the seatbelt locking mechanism to the side of the seat.

Disconnect the electrical power from the mechanism. If necessary, also replace the power cable if it is broken, disconnect it from the other connection located under the seat.

Now take the new locking mechanism and position it in the same place as the old one. The steps to follow are the same as seen but performed in reverse order. In the video, you can see that the mechanism replacing the old one is taken from another seat that is mounted differently but can be adapted to our seat.

This operation is performed on a Land Rover Discovery.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in the Land Rover Discovery 3
How to Replace the Battery in the Land Rover Discovery 3
Land Rover Discovery (2004-2010 / LR3, L319, Discovery 3, MK 3) In this new guide for your Land Rover Discovery Mk3, discover the steps to quickly and safely replace the car battery. First, ensure that you have pa…
Removing the Battery in a Land Rover Discovery
Removing the Battery in a Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Removing the battery from a Land Rover Discovery? Open the hood and let's see how to remove the battery. Lift the front hood by releasing the latch w…
How to Remove the EGR Valve on Land Rover Discovery
How to Remove the EGR Valve on Land Rover Discovery
Land Rover Discovery (2004-2010 / LR3, L319, Discovery 3, MK 3) Is the EGR valve damaged? Let's see how to remove it inside the engine compartment. Lift the hood and secure it, then detach the plastic soundproofin…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos