Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Land Rover Range Rover Velar

Model: Land Rover Velar MK 1 - Years 2017-2024
Part: Service warning light

To reset the service light on the Land Rover Range Rover Velar, start by getting in the vehicle and closing the driver door. Pull the lever to open the hood, then reopen the door. Without pressing the brake or accelerator, turn on the ignition. Now, press and hold the brake and accelerator pedals for 10 seconds until the "maintenance reset" message appears. Keep holding the pedals until the "maintenance counter reset" message appears, followed by the "maintenance reset" message again. Finally, release the pedals, turn off the ignition, and the service light has been reset.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse layout of the Land Rover Range Rover Velar?
What is the fuse layout of the Land Rover Range Rover Velar?
Land Rover Velar (2017-2024 / MK 1) In this video we can see where the fuse boxes of the Land Rover Range Rover Velar are located and what the respective diagrams are, useful in case we…
How to Change the Battery on the Land Rover Range Rover Velar
How to Change the Battery on the Land Rover Range Rover Velar
Land Rover Velar (2017-2024 / MK 1) Let's discover in this video the steps to remove and replace the battery on the Land Rover Range Rover Velar. First, locate the battery in the trunk;…
Service reset on a Range Rover Velar
Service reset on a Range Rover Velar
Land Rover Velar (2017-2024 / MK 1) Through this very useful video guide today, we can see how to reset the service light on a Range Rover Velar. So first of all, we need to open the fr…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos