Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuse Box in a Range Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

To locate the fuse box in your first-generation Range Rover Evoque (2011-2018), carefully follow the instructions in this new guide. First, ensure the vehicle is turned off, then disconnect both battery terminals to eliminate any health risks.

Next, go to the front passenger seat and open the glove compartment. After that, completely remove it to gain access to the fuse box. Remove its cover, and you're done.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

Where Are the Fuse Boxes in the Land Rover Evoque?
Where Are the Fuse Boxes in the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) The Land Rover Evoque has three fuse boxes instead of the usual two commonly found in most vehicles. The first two are located in standard positions.…
Where to Find the OBD2 Port of the Range Rover Evoque
Where to Find the OBD2 Port of the Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) To find the OBD2 port of your first-generation Range Rover Evoque, follow the procedure described below. First, make sure the vehicle is completely t…
What is the Fuse Diagram for the Land Rover Evoque?
What is the Fuse Diagram for the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) In this video, you can see where the fuse boxes are located in the Land Rover Evoque and the corresponding diagrams to consult if you need to check t…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos