Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the central display of the Range Rover

Model: Land Rover Range Rover L322, MK 3 - Years 2002-2012
Part: Checks and maintenance

If the central display of the infotainment system inside your Range Rover has suddenly stopped working and you don't know how to remove it, don't worry because we will explain how to do it correctly below. First of all, enter the car and make sure it is turned off, then remove the central control panel and disconnect the electrical cables connected to it. At this point, also remove the side air vents and then unscrew all the various screws. Finally, pull the display towards you and disconnect the cable located at the back to complete the removal.

Posted on 8 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on a Range Rover Sport
How to Set the Time on a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Before you begin, sit in the driver's seat of your Range Rover Sport. Start by activating the onboard computer by pressing the power button located o…
How to disassemble the clutch fan of the Land Rover Range Rover
How to disassemble the clutch fan of the Land Rover Range Rover
Land Rover Range Rover (2002-2012 / L322, MK 3) This brief guide will show us how to disassemble and replace the clutch fan of the Land Rover Range Rover, in simple and quick steps. First, we open …
Resetting the Engine Oil Level Warning Light on the Land Rover Range Rover
Resetting the Engine Oil Level Warning Light on the Land Rover Range Rover
Land Rover Range Rover (2012-2021 / MK 2) The Land Rover Range Rover has a system that monitors the amount of lubricating oil and alerts you if the level drops to a point that could jeopardiz…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos