Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Lexus NX 300?

Model: Lexus NX MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

See other generations:
Video tutorial

Resetting the tyre warning light on the Lexus NX 300 is an extremely simple and quick operation. Before proceeding, ensure that you have restored the correct pressure in each tyre according to the instructions in the manual.

Start by entering the cabin, then turn on the instrument cluster. Using the indicator buttons on the right side of the steering wheel, navigate to the settings menu.

Next, enter "Vehicle Settings", select "TPMS", and hold down the "OK" button. Finally, restart the instrument cluster.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Warning Light on a Lexus NX 300
How to Reset the Tyre Warning Light on a Lexus NX 300
Lexus NX (2014-2021 / MK 1) In this tutorial, you will learn how to reset the tyre warning light on a Lexus NX 300, a very simple and quick operation to perform only after resto…
How to Reset the Tyre Warning Light on a Lexus NX 300?
How to Reset the Tyre Warning Light on a Lexus NX 300?
Lexus NX (2014-2021 / MK 1) Resetting the tyre warning light on a Lexus NX 300 is an extremely simple and quick operation. Before proceeding, ensure that you have restored the c…
How to reset the tyre warning light in a Lexus NX 300?
How to reset the tyre warning light in a Lexus NX 300?
Lexus NX (2021-2026 / Az20, MK 2) In this tutorial, you will see how to reset the tyre warning light in a Lexus NX 300, a very simple and quick operation to perform only after restori…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos