Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Lexus CT key remote control.

Model: Lexus CT Zwa10 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Key

Video tutorial

In this short guide, we will see how to disassemble and replace the battery of the Lexus CT key remote. First, take your remote and start by removing the physical key from it; then, use the slot created to open the remote in two parts, accessing the electronic board and the battery, as shown in the video.

At this point, remove the battery and replace it with a new one, of the correct type and with the same code; insert it in the correct direction and reassemble the remote, then check the functioning of all the buttons.


Posted on 1 December 2024 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Lexus CT200H?
How to Replace the Remote Battery of the Lexus CT200H?
Lexus CT (2011-2022 / Zwa10) Replacing the remote battery of the Lexus CT200H is a straightforward and quick task. You will only need a replacement CR1632 battery. First, extract…
How to Replace the Key Battery of a Lexus CT
How to Replace the Key Battery of a Lexus CT
Lexus CT (2011-2021 / MK 1) A simple operation that will restore the convenience of remote opening for your vehicle using your key fob. To change the battery, slide the switch l…
How do you change the battery of the Lexus CT200H remote control?
How do you change the battery of the Lexus CT200H remote control?
Lexus CT (2011-2022 / Zwa10) In this video, we will see how to change the battery of the Lexus CT200H: first, we remove the emergency key by pulling it from the keychain side. Th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos